T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm

T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm Reviews

Other Picture

T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm Feature

• Standards: T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403, Interfaces: RJ48c 100ohm balanced T1 connector and single SC 155M fiber port
• Operating wavelength: Tx:1310nm/Rx:1550nm single strand WDM A type, Operating distance: 20Km on 9/125um fiber, power budget 17dB, Optical connector: SC single connector
• Front LEDs: Power, Fiber Link, T1 Link, Test mode
• Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug - included in the box
• Temperature: 0 - 50°C (Operating); 0 - 70°C (Storage), Humidity: 20 - 80% non condensing (Operating); 0 - 90% (Storage), Consumption: less than 4W, Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm, Weight: 340g (without AC adapter), Compliance: CE, FCC Class A, MTBF: 65,000 hours

The FIB1-T1R-SC20AF is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC20AF operates on single strand fiber up to 20Km (13mi) distance. The optical modules works on 2 wavelengths simultaneously: transmission is on 1310nm and data reception is on 1550nm. Always a WDM A type media converter MUST be matched with a WDM B type at the other end for proper operation. WDM B type converters have Tx:1550nm and Rx: 1310nm. Versions of 40Km, 60Km or 80Km WDM single strand fiber converters are available on request. The fiber media converter is equipped with single SC type optical connector. The media converter is also sometimes called T1 fiber modem. When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 14, 2011 19:16:03