Cisco - GBIC transceiver module - 1000Base-CWDM - SC/PC single mode - plug-in module - 1590 nm

Cisco - GBIC transceiver module - 1000Base-CWDM - SC/PC single mode - plug-in module - 1590 nm Reviews

Other Picture

Cisco - GBIC transceiver module - 1000Base-CWDM - SC/PC single mode - plug-in module - 1590 nm Feature

• Sold Individually

Item #: 678086. This is a Special Order Item. Please allow up to 7 business days for product to ship. The Cisco Coarse Wave Division Multiplexing (CWDM) Gigabit Interface Converter (GBIC) Solution allows enterprise companies and service providers to provide scalable and easy-to-deploy Gigabit Ethernet services in their networks. The product set enables the flexible design of highly available multiservice networks. The Cisco CWDM GBIC Solution offers a convenient and cost-effective solution for the adoption of Gigabit Ethernet in campus, data center, and metropolitan-area access networks. The Cisco CWDM GBICs fit into standard GBIC ports supporting the IEEE 802.3z standard on the supported Cisco platforms. The Cisco CWDM GBICs do not require configuration. The Cisco CWDM GBICs are designed for use in Cisco Catalyst 2900 Series with CatOS 7.2(1) - WS-C2948G, WS-C2980G-A; Cisco Catalyst 2950 Series with Cisco IOS Software Release 12.1(9)EA1 - WS-C2950G-12-EI, WS-C2950G-24-EI, WS-C2950G-24-EI-DC, WS-C2950G-48-EI; Cisco Catalyst 3550 Series with Cisco IOS Software Release 12.1(9)EA2 - WS-C3550-24-SMI, WS-C3550-24-EMI, WS-C3550-24-DC-SMI, WS-C3550-24-FX-SMI, WS-C3550-48-SMI, WS-C3550-48-EMI, WS-C3550-12G, WS-C3550-12T; Cisco Catalyst 4000 Series with CatOS 7.2 (1) - WS-X4232-GB-RJ, WS-X4306-GB, WS-X4412-2GB-T, WS-X4418-GB, WS-X4013, WS-X4014, WS-C4912G, Cisco Catalyst 6500 Series with CatOS 7.2 (2)3 - WS-X6K-SUP1-2GE, WS-X6K-SUP1A-2GE, WS-X6K-SUP1A-PFC, WS-X6K-SUP1A-MSFC, WS-X6K-SUP1A-MSFC2, WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2, WS-X6K-S2U-MSFC2, WS-X6408-GBIC, WS-X6408A-GBIC, WS-X6416-GBIC, WS-X6516-GBIC, WS-X6816-GBIC.

Device Type: GBIC transceiver module - SC/PC single mode
Enclosure Type: Plug-in module
Cabling Type: 1000Base-CWDM
Data Transfer Rate: 1.25 Gbps
Optical Wave Length: 1510 nm
Data Link Protocol: Gigabit Ethernet
Compliant Standards: IEEE 802.3z
Manufacturer Warranty: 3 months

Visit Store Now !!

Detail Products

Detail Reviews

Aug 21, 2011 17:16:03

T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm

T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm Reviews

Other Picture

T1 to single strand fiber optic media converter WDM A type (T1 fiber modem) - FIB1-T1R-SC20AF, 20Km, Tx:1310nm/Rx:1550nm Feature

• Standards: T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403, Interfaces: RJ48c 100ohm balanced T1 connector and single SC 155M fiber port
• Operating wavelength: Tx:1310nm/Rx:1550nm single strand WDM A type, Operating distance: 20Km on 9/125um fiber, power budget 17dB, Optical connector: SC single connector
• Front LEDs: Power, Fiber Link, T1 Link, Test mode
• Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug - included in the box
• Temperature: 0 - 50°C (Operating); 0 - 70°C (Storage), Humidity: 20 - 80% non condensing (Operating); 0 - 90% (Storage), Consumption: less than 4W, Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm, Weight: 340g (without AC adapter), Compliance: CE, FCC Class A, MTBF: 65,000 hours

The FIB1-T1R-SC20AF is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC20AF operates on single strand fiber up to 20Km (13mi) distance. The optical modules works on 2 wavelengths simultaneously: transmission is on 1310nm and data reception is on 1550nm. Always a WDM A type media converter MUST be matched with a WDM B type at the other end for proper operation. WDM B type converters have Tx:1550nm and Rx: 1310nm. Versions of 40Km, 60Km or 80Km WDM single strand fiber converters are available on request. The fiber media converter is equipped with single SC type optical connector. The media converter is also sometimes called T1 fiber modem. When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 14, 2011 19:16:03

Gigabit copper 10/100/1000BaseT to single strand BiDi fiber converter B type Tx:1550/Rx:1310nm, 10Km (SFP bundle) - FIB1-1000ES-W10B

Gigabit copper 10/100/1000BaseT to single strand BiDi fiber converter B type Tx:1550/Rx:1310nm, 10Km (SFP bundle) - FIB1-1000ES-W10B Reviews

Other Picture

Gigabit copper 10/100/1000BaseT to single strand BiDi fiber converter B type Tx:1550/Rx:1310nm, 10Km (SFP bundle) - FIB1-1000ES-W10B Feature

• Interfaces: RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX, 802.3ab 1000Base-T and LC single connector for WDM BiDi Tx:1550nm/Rx:1310nm fiber optic port
• Connectors: RJ-45 copper 10/100/1000 Mbps and LC single optical connector, UTP port: MDI/MDI-X, auto-negotiation, Full/Half Duplex, max. packet 1536 bytes, Optical connector: LC duplex, Optical wavelength: Tx:1550/Rx:1310nm, powered by a Fabry-Perot laser diode, Operating distance: 10Km on 9/125um fiber
• Front LEDs: PWR, LLF, Fiber Link, TP Link, Duplex, Speed
• Power: External 90-260V AC switching adapter 12VDC@1A with NEMA1-15(2 blades only), US type main plug - included in the box
• Temperature: 0 - 50°C (Operating); 0 - 70°C (Storage), Humidity: 20 - 80% non condensing (Operating); 0 - 90% (Storage), Consumption: less than 4W, Dimensions(WxDxH): 85.6mm x 122.6mm x 20mm, Weight: 340g (without AC adapter), Compliance: CE, FCC Class A, MTBF: 65,000 hours

The FIB1-1000ES-W10B Gigabit Ethernet media converter is currently made of two different items, the FIB1-1000ES converter and the single strand BiDi B type Tx:1550/Rx:1310nm SFP optical module. The converter can operate on 9/125 singlemode fiber. Maximum range is 10Km over single-mode single-strand 9/125um fiber. The uniqueness of FIB1-1000ES-W10B Gigabit converter is given by the ability to convert from standalone media converter to card for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-1000ES-W10B Gigabit Ethernet media converter one of the best choices of fiber converters for data carriers and service providers. Please note that because FIB1-1000ES-W10B is a single strand BiDi media converter it must always be paired with a B type converter like the FIB1-1000ES-W10A in order to have an operational link.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 09, 2011 02:00:05